BBakken SubsurfaceNorth Dakota well index

Spacing unit · Dunn County

1,280-acre Bakken spacing unit

T146N R96W section 35

Spacing unit7 wells allowed · order 34301Jim Creek-Bakken

Unit facts

Formation
Bakken
Acres
1,280
Type
Spacing unit
Land described
T146N R96W section 35
Pool
Jim Creek-Bakken
Zone
Zone V
County
Dunn County
Surveyed wells inside
3
Most wells operated by
Continental Resources
Unit id
dsu-577427d3d5e818a8f173
Wells allowed by the latest linked order
7
Wells assigned to this unit
3
Pending permits inside
0
Balance under the allowance
+4
First linked order
May 25, 2007
Laterals that still fit (Nov 2026 method)
8 (7.6 two-mile equivalents)
Neighbourhood target density
10.44 two-mile laterals per 1,280 acres
Density drilled so far
2.76 per 1,280 acres

Room to drill: 8 laterals still fit at the density this unit's neighbourhood has reached (the larger of the 75th percentile of mature units within 10 miles and the median of units drilled in the last three years), placed in the widest gaps with the setbacks of the November 2026 method. Machine-made and geometric: not a commitment to drill, not a permit, order, lease or plan, and no economics. Land is counted once, so a unit under a larger unit shows only what the larger one left. How it is computed.

Map

Bonney 11-3HSLKELLY 2-2HKELLY 44-2H1 mi

DMR footprint (NAD83) with the published surface locations of its wells. Laterals run under the unit; pads often sit on a neighbouring section.

Open in the regional 3D viewerFootprint, wells and production playbackSee on the cases and orders mapHistorical spacing units by order

Wells inside the unit

WellOperatorStatusLateral inside
Bonney 11-3HSLCONTINENTAL RESOURCES, INC.Active (A)10,253 ft100%
KELLY 2-2HCONTINENTAL RESOURCES, INC.Active (A)9,541 ft100%
KELLY 44-2HCONTINENTAL RESOURCES, INC.Active (A)9,301 ft100%

Surveyed Bakken-system laterals with at least 660 ft of plan-view length inside the published footprint. Geometric membership, not a legal assignment; a lateral can cross several units.

Order history

  1. Order 11101Case 9456Established the spacing unitBURLINGTON RESOURCES OIL & GAS CO. LP
  2. Order 11662Case 9903Designated the spacing unitBURLINGTON RESOURCES OIL & GAS CO. LP,
  3. Order 12543Case 10605Established the spacing unitCONTINENTAL RESOURCES, INC.
  4. Order 13762Case 11622Designated the spacing unitCONTINENTAL RESOURCES, INC.
  5. Order 13955Case 11789Designated the spacing unit, 2 wells allowedCONTINENTAL RESOURCES, INC.
  6. Order 15429Case 13161Pooled all interests in the unitCONTINENTAL RESOURCES, INC.
  7. Order 15533Case 12026Designated the spacing unit, 7 wells allowedCONTINENTAL RESOURCES, INC.
  8. Order 15803Case 13525Established the spacing unit, 7 wells allowedCONTINENTAL RESOURCES, INC.
  9. Order 24874Case 22540Designated the spacing unit, 7 wells allowedXTO ENERGY INC.
  10. Order 23932Case 21582Established the spacing unit, 14 wells allowedCONTINENTAL RESOURCES, INC.
  11. Order 26117Case 23776Designated the spacing unit, 14 wells allowedBURLINGTON RESOURCES OIL & GAS CO. LP
  12. Order 27906Case 25503Designated the spacing unit, 2 wells allowedCONTINENTAL RESOURCES, INC.
  13. Order 28071Case 25661Established the spacing unit, 2 wells allowedBURLINGTON RESOURCES OIL & GAS CO. LP
  14. Order 33456Case 30796Designated the spacing unit, 7 wells allowedBURLINGTON RESOURCES OIL & GAS CO. LP
  15. Order 33476Case 30816Established the spacing unit, 7 wells allowedBURLINGTON RESOURCES OIL AND GAS CO. LP

Facts extracted from signed NDIC orders whose land description covers this footprint; machine-extracted and not human-reviewed. A stated allowance is what that order allowed, not proof that it governs today.

Overlapping units

2 other units share a surveyed well with this one; overlapping units are not additive.