BBakken SubsurfaceNorth Dakota well index

Spacing unit · Dunn County

1,280-acre Bakken spacing unit

T146N R97W sections 14, 23

Spacing unit10 wells allowed · order 35776Little Knife-Bakken

Unit facts

Formation
Bakken
Acres
1,280
Type
Spacing unit
Land described
T146N R97W sections 14, 23
Pool
Little Knife-Bakken
Zone
Zone XII
County
Dunn County
Surveyed wells inside
12
Most wells operated by
Continental Resources
Unit id
dsu-5d46efc5bb937c120631
Wells allowed by the latest linked order
10
Wells assigned to this unit
12
Pending permits inside
0
Balance under the allowance
-2
First linked order
Jan 16, 2009
Review note
over_allowance
Laterals that still fit (Nov 2026 method)
0
Neighbourhood target density
11.72 two-mile laterals per 1,280 acres
Density drilled so far
11.33 per 1,280 acres

Room to drill: 0 laterals still fit at the density this unit's neighbourhood has reached (the larger of the 75th percentile of mature units within 10 miles and the median of units drilled in the last three years), placed in the widest gaps with the setbacks of the November 2026 method. Machine-made and geometric: not a commitment to drill, not a permit, order, lease or plan, and no economics. Land is counted once, so a unit under a larger unit shows only what the larger one left. How it is computed.

Map

Edward 7-23HEdward 12-23HSLEdward 10-23HEdward 8-23H1Edward 9-23H1Edward 11-23H1Edward 3-23HEdward 6-23H1Edward 5-23HEdward 2-23HSL1Edward 4-23H1EDWARD 1-23H1 mi

DMR footprint (NAD83) with the published surface locations of its wells. Laterals run under the unit; pads often sit on a neighbouring section.

Open in the regional 3D viewerFootprint, wells and production playbackSee on the cases and orders mapHistorical spacing units by order

Wells inside the unit

WellOperatorStatusLateral inside
Edward 12-23HSLCONTINENTAL RESOURCES, INC.Active (A)10,213 ft100%
Edward 7-23HCONTINENTAL RESOURCES, INC.Active (A)10,213 ft100%
Edward 10-23HCONTINENTAL RESOURCES, INC.Active (A)10,200 ft100%
Edward 8-23H1CONTINENTAL RESOURCES, INC.Active (A)10,195 ft100%
Edward 9-23H1CONTINENTAL RESOURCES, INC.Active (A)10,158 ft100%
Edward 11-23H1CONTINENTAL RESOURCES, INC.Active (A)10,126 ft100%
Edward 3-23HCONTINENTAL RESOURCES, INC.Active (A)9,980 ft100%
Edward 6-23H1CONTINENTAL RESOURCES, INC.Active (A)9,898 ft100%
Edward 5-23HCONTINENTAL RESOURCES, INC.Active (A)9,889 ft100%
Edward 2-23HSL1CONTINENTAL RESOURCES, INC.Active (A)9,839 ft100%
Edward 4-23H1CONTINENTAL RESOURCES, INC.Active (A)9,819 ft100%
EDWARD 1-23HCONTINENTAL RESOURCES, INC.Active (A)9,559 ft100%

Surveyed Bakken-system laterals with at least 660 ft of plan-view length inside the published footprint. Geometric membership, not a legal assignment; a lateral can cross several units.

Order history

  1. Order 12719Case 10755Established the spacing unitCONTINENTAL RESOURCES, INC.
  2. Order 14251Case 12020Designated the spacing unitCONTINENTAL RESOURCES, INC.
  3. Order 14366Case 12116Designated the spacing unit, 4 wells allowedTRACKER RESOURCE DEVELOPMENT II, LLC
  4. Order 16391Case 14116Pooled all interests in the unitCONTINENTAL RESOURCES, INC.
  5. Order 21423Case 19120Designated the spacing unit, 8 wells allowedSINCLAIR OIL & GAS CO.
  6. Order 21423Case 19120Listed the unit in a pool zone table, 4 wells allowedSINCLAIR OIL & GAS CO.
  7. Order 26009Case 23668Designated the spacing unit, 3 wells allowedBURLINGTON RESOURCES OIL & GAS CO. LP
  8. Order 26009Case 23668Listed the unit in a pool zone table, 4 wells allowedBURLINGTON RESOURCES OIL & GAS CO. LP
  9. Order 32175Case 29603Designated the spacing unit, 10 wells allowedCONTINENTAL RESOURCES, INC.
  10. Order 32182Case 29610Established the spacing unit, 10 wells allowedCONTINENTAL RESOURCES, INC.
  11. Order 33890Case 31201Designated the spacing unit, 8 wells allowedENERPLUS RESOURCES (USA) CORP.
  12. Order 33890Case 31201Designated the spacing unit, 10 wells allowedENERPLUS RESOURCES (USA) CORP.

Facts extracted from signed NDIC orders whose land description covers this footprint; machine-extracted and not human-reviewed. A stated allowance is what that order allowed, not proof that it governs today.

Overlapping units

2 other units share a surveyed well with this one; overlapping units are not additive.