BBakken SubsurfaceNorth Dakota well index

Spacing unit · Burke County

640-acre Bakken spacing unit

T160N R94W section 6

Spacing unitStoneview-Bakken

Unit facts

Formation
Bakken
Acres
640
Type
Spacing unit
Land described
T160N R94W section 6
Pool
Stoneview-Bakken
Zone
Zone III
County
Burke County
Surveyed wells inside
1
Most wells operated by
CONTINENTAL RESOURCES, INC.
Unit id
dsu-8486068a8d8e62aeda17
Laterals that still fit (Nov 2026 method)
0
Neighbourhood target density
4.62 two-mile laterals per 1,280 acres
Density drilled so far
0.88 per 1,280 acres

Room to drill: 0 laterals still fit at the density this unit's neighbourhood has reached (the larger of the 75th percentile of mature units within 10 miles and the median of units drilled in the last three years), placed in the widest gaps with the setbacks of the November 2026 method. 4 more would fit the density but not the spacing rule. Machine-made and geometric: not a commitment to drill, not a permit, order, lease or plan, and no economics. Land is counted once, so a unit under a larger unit shows only what the larger one left. How it is computed.

Map

POINTS 1-6H1 mi

DMR footprint (NAD83) with the published surface locations of its wells. Laterals run under the unit; pads often sit on a neighbouring section.

Open in the regional 3D viewerFootprint, wells and production playbackSee on the cases and orders mapHistorical spacing units by order

Wells inside the unit

WellOperatorStatusLateral inside
POINTS 1-6HCONTINENTAL RESOURCES, INC.Active (A)4,559 ft100%

Surveyed Bakken-system laterals with at least 660 ft of plan-view length inside the published footprint. Geometric membership, not a legal assignment; a lateral can cross several units.

Order history

  1. Order 11890Case 10076Established the spacing unitCONTINENTAL RESOURCES, INC.
  2. Order 18741Case 16475Pooled all interests in the unitCONTINENTAL RESOURCES, INC.

Facts extracted from signed NDIC orders whose land description covers this footprint; machine-extracted and not human-reviewed. A stated allowance is what that order allowed, not proof that it governs today.

Overlapping units

3 other units share a surveyed well with this one; overlapping units are not additive.