BBakken SubsurfaceNorth Dakota well index

Spacing unit · McKenzie County

2,560-acre Bakken spacing unit

T151N R97W sections 17, 18, 19, 20

Spacing unit2 wells allowed · order 34302Elidah-Bakken

Unit facts

Formation
Bakken
Acres
2,560
Type
Spacing unit
Land described
T151N R97W sections 17, 18, 19, 20
Pool
Elidah-Bakken
Zone
Zone X
County
McKenzie County
Surveyed wells inside
20
Most wells operated by
Continental Resources
Unit id
dsu-8f4c82cb9b40e8ff8bcf
Wells allowed by the latest linked order
2
Wells assigned to this unit
0
Pending permits inside
0
Balance under the allowance
-18
First linked order
Feb 18, 2015
Laterals that still fit (Nov 2026 method)
2 (1.91 two-mile equivalents)
Neighbourhood target density
10.59 two-mile laterals per 1,280 acres
Density drilled so far
9.68 per 1,280 acres

Room to drill: 2 laterals still fit at the density this unit's neighbourhood has reached (the larger of the 75th percentile of mature units within 10 miles and the median of units drilled in the last three years), placed in the widest gaps with the setbacks of the November 2026 method. Machine-made and geometric: not a commitment to drill, not a permit, order, lease or plan, and no economics. Land is counted once, so a unit under a larger unit shows only what the larger one left. How it is computed.

Map

Omlid 13-19HOMLID 6-19HOMLID 8-19HOMLID 5-19H2OMLID 4-19HOMLID 3-19H1OMLID 2-19HOMLID 7-19H1Omlid 12-19HOMLID 10-19HSLOMLID 9-19HSL2HE 2-8-20MBHHE 3-8-20UTFHHE 7-8-20MBHHE 4-8-20MBHHE 5-8-20UTFHHE 6-8-20UTFHHE 1-20HHE 14-20TFHOMLID 18-19HTF1 mi

DMR footprint (NAD83) with the published surface locations of its wells. Laterals run under the unit; pads often sit on a neighbouring section.

Open in the regional 3D viewerFootprint, wells and production playbackSee on the cases and orders mapHistorical spacing units by order

Wells inside the unit

WellOperatorStatusLateral inside
Omlid 13-19HCONTINENTAL RESOURCES, INC.Active (A)10,405 ft96%
OMLID 6-19HCONTINENTAL RESOURCES, INC.Active (A)10,403 ft94%
OMLID 8-19HCONTINENTAL RESOURCES, INC.Active (A)10,398 ft97%
OMLID 4-19HCONTINENTAL RESOURCES, INC.Active (A)10,396 ft95%
OMLID 5-19H2CONTINENTAL RESOURCES, INC.Active (A)10,396 ft95%
OMLID 2-19HCONTINENTAL RESOURCES, INC.Active (A)10,394 ft95%
OMLID 3-19H1CONTINENTAL RESOURCES, INC.Active (A)10,394 ft94%
OMLID 7-19H1CONTINENTAL RESOURCES, INC.Active (A)10,392 ft97%
Omlid 12-19HCONTINENTAL RESOURCES, INC.Active (A)10,378 ft95%
OMLID 10-19HSLCONTINENTAL RESOURCES, INC.Active (A)10,274 ft100%
OMLID 9-19HSL2CONTINENTAL RESOURCES, INC.Active (A)10,228 ft100%
HE 2-8-20MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,975 ft100%
HE 3-8-20UTFHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,972 ft100%
HE 7-8-20MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,956 ft100%
HE 4-8-20MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,953 ft100%
HE 5-8-20UTFHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,914 ft100%
HE 6-8-20UTFHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,891 ft100%
HE 1-20HBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,773 ft100%
HE 14-20TFHBURLINGTON RESOURCES OIL & GAS COMPANY LPAbandoned (AB)9,674 ft100%
OMLID 18-19HTFCONTINENTAL RESOURCES, INC.Inactive (IA)9,309 ft100%

Surveyed Bakken-system laterals with at least 660 ft of plan-view length inside the published footprint. Geometric membership, not a legal assignment; a lateral can cross several units.

Order history

  1. Order 24938Case 22603Established the spacing unitBURLINGTON RESOURCES OIL & GAS CO. LP
  2. Order 26241Case 23900Pooled all interests in the unitBURLINGTON RESOURCES OIL & GAS CO. LP,
  3. Order 23712Case 21381Designated the spacing unitCONTINENTAL RESOURCES, INC.
  4. Order 23712Case 21381Listed the unit in a pool zone table, 2 wells allowedCONTINENTAL RESOURCES, INC.
  5. Order 27836Case 25433Designated the spacing unitCONTINENTAL RESOURCES, INC.
  6. Order 28206Case 25795Established the spacing unit, 2 wells allowedCONTINENTAL RESOURCES, INC.

Facts extracted from signed NDIC orders whose land description covers this footprint; machine-extracted and not human-reviewed. A stated allowance is what that order allowed, not proof that it governs today.

Overlapping units

5 other units share a surveyed well with this one; overlapping units are not additive.