BBakken SubsurfaceNorth Dakota well index

Spacing unit · McKenzie County

2,560-acre Bakken spacing unit

T151N R97W sections 26, 27, 34, 35

Spacing unit2 wells allowed · order 34302Elidah-Bakken

Unit facts

Formation
Bakken
Acres
2,560
Type
Spacing unit
Land described
T151N R97W sections 26, 27, 34, 35
Pool
Elidah-Bakken
Zone
Zone X
County
McKenzie County
Surveyed wells inside
17
Most wells operated by
Burlington / Marathon
Unit id
dsu-aea2aeaee7da062025a0
Wells allowed by the latest linked order
2
Wells assigned to this unit
0
Pending permits inside
0
Balance under the allowance
-15
First linked order
Feb 18, 2015
Laterals that still fit (Nov 2026 method)
0
Neighbourhood target density
10.6 two-mile laterals per 1,280 acres
Density drilled so far
7.91 per 1,280 acres

Room to drill: 0 laterals still fit at the density this unit's neighbourhood has reached (the larger of the 75th percentile of mature units within 10 miles and the median of units drilled in the last three years), placed in the widest gaps with the setbacks of the November 2026 method. Machine-made and geometric: not a commitment to drill, not a permit, order, lease or plan, and no economics. Land is counted once, so a unit under a larger unit shows only what the larger one left. How it is computed.

Map

MURI 2E-MBHGUDMUNSON 1-1-26MBHMURI 1A-MBHGUDMUNSON 7-1-26MBHMURI 3C-UTFHGUDMUNSON 6-1-26TFHMuri 3B-MBHMURI 2D-UTFHMURI 2A-MBHGUDMUNSON 1-26HGUDMURI 1-1-26TFH-ULWGUDMUNSON 11-26TFHGUDMUNSON 3-1-26MBHGUDMUNSON 4-1-26TFHMURI 1-27HSANMURI 4B-UTFH-ULWGUDCADIA 8-1-26TFH-ULW1 mi

DMR footprint (NAD83) with the published surface locations of its wells. Laterals run under the unit; pads often sit on a neighbouring section.

Open in the regional 3D viewerFootprint, wells and production playbackSee on the cases and orders mapHistorical spacing units by order

Wells inside the unit

WellOperatorStatusLateral inside
MURI 2E-MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)11,383 ft100%
GUDMUNSON 1-1-26MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)10,791 ft100%
MURI 1A-MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)10,187 ft100%
GUDMUNSON 7-1-26MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)10,058 ft100%
MURI 3C-UTFHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,971 ft100%
GUDMUNSON 6-1-26TFHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,970 ft100%
Muri 3B-MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,917 ft100%
MURI 2D-UTFHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,900 ft100%
MURI 2A-MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,874 ft100%
GUDMUNSON 1-26HCONTINENTAL RESOURCES, INC.Active (A)9,692 ft100%
GUDMURI 1-1-26TFH-ULWBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,687 ft100%
GUDMUNSON 11-26TFHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,637 ft100%
GUDMUNSON 3-1-26MBHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,629 ft100%
GUDMUNSON 4-1-26TFHBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)9,531 ft100%
MURI 1-27HCONTINENTAL RESOURCES, INC.Active (A)9,285 ft100%
SANMURI 4B-UTFH-ULWBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)8,514 ft85%
GUDCADIA 8-1-26TFH-ULWBURLINGTON RESOURCES OIL & GAS COMPANY LPActive (A)7,752 ft79%

Surveyed Bakken-system laterals with at least 660 ft of plan-view length inside the published footprint. Geometric membership, not a legal assignment; a lateral can cross several units.

Order history

  1. Order 25303Case 22970Established the spacing unitBURLINGTON RESOURCES OIL & GAS CO. LP
  2. Order 26466Case 24123Pooled all interests in the unitBURLINGTON RESOURCES OIL & GAS CO. LP,
  3. Order 23712Case 21381Designated the spacing unitCONTINENTAL RESOURCES, INC.
  4. Order 27423Case 25020Designated the spacing unitBURLINGTON RESOURCES OIL & GAS CO. LP
  5. Order 27521Case 25114Designated the spacing unit, 2 wells allowedBURLINGTON RESOURCES OIL & GAS CO. LP
  6. Order 27542Case 25135Established the spacing unit, 2 wells allowedBURLINGTON RESOURCES OIL & GAS CO. LP

Facts extracted from signed NDIC orders whose land description covers this footprint; machine-extracted and not human-reviewed. A stated allowance is what that order allowed, not proof that it governs today.

Overlapping units

8 other units share a surveyed well with this one; overlapping units are not additive.