BBakken SubsurfaceNorth Dakota well index

Spacing unit · McKenzie County

2,560-acre Bakken spacing unit

T152N R99W sections 13, 24, 25, 36

Spacing unit24 wells allowed · order 31430Banks-Bakken

Unit facts

Formation
Bakken
Acres
2,560
Type
Spacing unit
Land described
T152N R99W sections 13, 24, 25, 36
Pool
Banks-Bakken
Zone
Zone XXIV
County
McKenzie County
Surveyed wells inside
17
Most wells operated by
Continental Resources
Unit id
dsu-fb96c0960b4a14820943
Wells allowed by the latest linked order
24
Wells assigned to this unit
6
Pending permits inside
0
Balance under the allowance
+7
First linked order
Aug 30, 2012
Laterals that still fit (Nov 2026 method)
0
Neighbourhood target density
9.59 two-mile laterals per 1,280 acres
Density drilled so far
8.04 per 1,280 acres

Room to drill: 0 laterals still fit at the density this unit's neighbourhood has reached (the larger of the 75th percentile of mature units within 10 miles and the median of units drilled in the last three years), placed in the widest gaps with the setbacks of the November 2026 method. Machine-made and geometric: not a commitment to drill, not a permit, order, lease or plan, and no economics. Land is counted once, so a unit under a larger unit shows only what the larger one left. How it is computed.

Map

STEELE FEDERAL 9-24HSTEELE 1-24HSTEELE FEDERAL 4-24AH1STEELE FEDERAL 5-24H1STEELE FEDERAL 3-24AHSTEELE FEDERAL 8-24H1STEELE FEDERAL 6-24HHAGEN BANKS 5198 12-6 13TXSTEELE 2-24HLANSING 1-25HLANSING 2-25HLANSING 4-25AH1LANSING 6-25HLANSING 9-25HLANSING 8-25H1LANSING 5-25H1LANSING 3-25AH1 mi

DMR footprint (NAD83) with the published surface locations of its wells. Laterals run under the unit; pads often sit on a neighbouring section.

Open in the regional 3D viewerFootprint, wells and production playbackSee on the cases and orders mapHistorical spacing units by order

Wells inside the unit

WellOperatorStatusLateral inside
STEELE FEDERAL 9-24HCONTINENTAL RESOURCES, INC.Active (A)11,137 ft100%
STEELE 1-24HCONTINENTAL RESOURCES, INC.Active (A)10,915 ft100%
STEELE FEDERAL 4-24AH1CONTINENTAL RESOURCES, INC.Active (A)10,829 ft100%
STEELE FEDERAL 5-24H1CONTINENTAL RESOURCES, INC.Active (A)10,759 ft100%
STEELE FEDERAL 3-24AHCONTINENTAL RESOURCES, INC.Active (A)10,712 ft100%
STEELE FEDERAL 8-24H1CONTINENTAL RESOURCES, INC.Active (A)10,661 ft100%
STEELE FEDERAL 6-24HCONTINENTAL RESOURCES, INC.Active (A)10,532 ft100%
HAGEN BANKS 5198 12-6 13TXOASIS PETROLEUM NORTH AMERICA LLCActive (A)10,096 ft99%
STEELE 2-24HCONTINENTAL RESOURCES, INC.Active (A)9,884 ft100%
LANSING 1-25HCONTINENTAL RESOURCES, INC.Active (A)9,607 ft100%
LANSING 2-25HCONTINENTAL RESOURCES, INC.Active (A)9,550 ft100%
LANSING 4-25AH1CONTINENTAL RESOURCES, INC.Temporarily abandoned (TA)9,355 ft100%
LANSING 6-25HCONTINENTAL RESOURCES, INC.Active (A)9,322 ft100%
LANSING 9-25HCONTINENTAL RESOURCES, INC.Active (A)9,257 ft100%
LANSING 8-25H1CONTINENTAL RESOURCES, INC.Inactive (IA)9,215 ft100%
LANSING 5-25H1CONTINENTAL RESOURCES, INC.Active (A)9,190 ft100%
LANSING 3-25AHCONTINENTAL RESOURCES, INC.Active (A)9,165 ft100%

Surveyed Bakken-system laterals with at least 660 ft of plan-view length inside the published footprint. Geometric membership, not a legal assignment; a lateral can cross several units.

Order history

  1. Order 19775Case 17505Designated the spacing unitHESS CORP.
  2. Order 19839Case 17569Established the spacing unitCONTINENTAL RESOURCES, INC.
  3. Order 19839Case 17569Listed the unit in a pool zone table, 7 wells allowedCONTINENTAL RESOURCES, INC.
  4. Order 21744Case 19442Listed the unit in a pool zone table, 4 wells allowedKODIAK OIL & GAS (USA) INC.
  5. Order 22073Case 19767Pooled all interests in the unitCONTINENTAL RESOURCES, INC.
  6. Order 23453Case 21149Established the spacing unitCONTINENTAL RESOURCES, INC.
  7. Order 26039Case 23698Listed the unit in a pool zone table, 6 wells allowedWHITING OIL AND GAS CORP.
  8. Order 30107Case 27663Listed the unit in a pool zone table, 20 wells allowedOASIS PETROLEUM NORTH AMERICA LLC
  9. Order 31196Case 28653Designated the spacing unitCONTINENTAL RESOURCES, INC.
  10. Order 31430Case 28884Designated the spacing unit, 24 wells allowedGRAYSON MILL OPERATING, LLC

Facts extracted from signed NDIC orders whose land description covers this footprint; machine-extracted and not human-reviewed. A stated allowance is what that order allowed, not proof that it governs today.

Overlapping units

4 other units share a surveyed well with this one; overlapping units are not additive.