Spacing unit · Dunn County
1,280-acre Bakken spacing unit
T146N R96W section 31
Unit facts
- Formation
- Bakken
- Acres
- 1,280
- Type
- Spacing unit
- Land described
- T146N R96W section 31
- Pool
- Jim Creek-Bakken
- Zone
- Zone I
- County
- Dunn County
- Surveyed wells inside
- 7
- Most wells operated by
- Continental Resources
- Unit id
dsu-745791fa66061b32a8e3- Wells allowed by the latest linked order
- 1
- Wells assigned to this unit
- 2
- Pending permits inside
- 0
- Balance under the allowance
- -6
- First linked order
- Aug 28, 2007
- Review note
- over_allowance
- Laterals that still fit (Nov 2026 method)
- 5 (4.75 two-mile equivalents)
- Neighbourhood target density
- 10.69 two-mile laterals per 1,280 acres
- Density drilled so far
- 6.17 per 1,280 acres
Room to drill: 5 laterals still fit at the density this unit's neighbourhood has reached (the larger of the 75th percentile of mature units within 10 miles and the median of units drilled in the last three years), placed in the widest gaps with the setbacks of the November 2026 method. Machine-made and geometric: not a commitment to drill, not a permit, order, lease or plan, and no economics. Land is counted once, so a unit under a larger unit shows only what the larger one left. How it is computed.
Map
DMR footprint (NAD83) with the published surface locations of its wells. Laterals run under the unit; pads often sit on a neighbouring section.
Wells inside the unit
| Well | Operator | Status | Lateral inside |
|---|---|---|---|
| BENNER 1-6H | CONTINENTAL RESOURCES, INC. | Active (A) | 10,535 ft100% |
| Benner 5-7H | CONTINENTAL RESOURCES, INC. | Active (A) | 10,374 ft67% |
| Benner 4-7H | CONTINENTAL RESOURCES, INC. | Active (A) | 10,373 ft67% |
| Micahlucas 3-5HSL | CONTINENTAL RESOURCES, INC. | Active (A) | 10,358 ft67% |
| Benner 3-7H | CONTINENTAL RESOURCES, INC. | Active (A) | 10,354 ft67% |
| Benner 2-7HSL | CONTINENTAL RESOURCES, INC. | Active (A) | 10,351 ft67% |
| Eclipse SWD | CONTINENTAL RESOURCES, INC. | Active (A) | 1,768 ft100% |
Surveyed Bakken-system laterals with at least 660 ft of plan-view length inside the published footprint. Geometric membership, not a legal assignment; a lateral can cross several units.
Order history
- Order 11250Case 9578Established the spacing unitCONTINENTAL RESOURCES, INC.
- Order 14249Case 12013Established the spacing unit, 4 wells allowed
- Order 16393Case 14118Pooled all interests in the unitCONTINENTAL RESOURCES, INC.
- Order 24874Case 22540Designated the spacing unit, 4 wells allowedXTO ENERGY INC.
- Order 23932Case 21582Established the spacing unit, 14 wells allowedCONTINENTAL RESOURCES, INC.
- Order 26117Case 23776Designated the spacing unit, 14 wells allowedBURLINGTON RESOURCES OIL & GAS CO. LP
- Order 32695Case 30085Established the spacing unit, 1 well allowedCONTINENTAL RESOURCES, INC.
- Order 32695Case 30085Designated the spacing unitCONTINENTAL RESOURCES, INC.
- Order 34301Case 31569Designated the spacing unitBURLINGTON RESOURCES OIL AND GAS CO. LP
Facts extracted from signed NDIC orders whose land description covers this footprint; machine-extracted and not human-reviewed. A stated allowance is what that order allowed, not proof that it governs today.
Overlapping units
7 other units share a surveyed well with this one; overlapping units are not additive.
- T146N R97W section 36 3,840-acre Bakken spacing unit
- T146N R97W sections 13, 24, 25 3,840-acre Bakken spacing unit
- T145N R96W sections 7, 18 1,280-acre Bakken spacing unit
- T146N R96W section 31 1,920-acre Bakken spacing unit
- T145N R96W sections 7, 8, 17, 18 2,560-acre Bakken spacing unit
- T146N R96W sections 29, 30, 31, 32 3,840-acre Bakken spacing unit
- T146N R96W sections 19, 30 1,280-acre Bakken spacing unit